Aeroflow Dynamics 2013-2016 Scion FR-S Front Splitter V2

What's the purpose of having a front splitter?

An automotive splitter is a modification typically found at the front of the car, containing a protruding flat surface acting as a firm extension of the front bumper. There are many different configurations as far as their aesthetic, and utilized material. The design and purpose is aimed at decreasing front end lift, which would equate to numerous performance benefits. When a car reaches higher speeds, it will accumulate air pressure build up at the front of the vehicle. All of this air will end up going both above the car, as well as below the car (under the front bumper). When excess amounts of this air builds up, the under-car air pressures builds up. This increased air pressure contributes to lift, which causes the front end of the vehicle to lift up. This results in decreased traction on the road & a compromised handling characteristic. The key to alleviate this, is creating positive downforce. The splitter forces the high pressure air upwards where it builds up around the bumper, and ultimately migrates this pressure over the car resulting in reduced lift. The splitter is typically supported by rods to ensure that the splitter stays parallel to the ground, rods will also assist with the outside forces and elements endangering the integrity of the splitter.